Muebles y Diseños built a demountable modular installation for Tigo in San Salvador, El Salvador, for brand activations and trade shows. The structure uses contemporary geometries in thermoformed MDF, aluminum, acrylic and integrated LED, and is designed to be assembled and struck repeatedly while keeping its finish, with the rigidity and safety a public-facing space requires.
What makes a demountable stand different from fixed furniture?
Fixed furniture is assembled once; a stand is assembled and struck many times, and every cycle is a chance to damage it. That changes the design fundamentally: joints cannot be glued but must be demountable and repeatable, exposed edges need protection because they take the knocks in transit, and every module has to fit in a vehicle and through a doorway. A stand that only works well on its first build is badly designed, however good the finish.
Why thermoformed MDF, aluminum and acrylic?
Each material solves a different part. Thermoformed MDF allows the curves and continuous geometries that would be impractical or very costly in solid wood. Aluminum provides the structure: rigid and light, and weight matters when the piece is transported and assembled by hand. Acrylic allows evenly backlit surfaces, which is what makes the integrated LED read as light rather than as a strip of dots.
What does safety involve in a public-facing structure?
It means designing for misuse, not for intended use. At an activation people lean where they should not, children push panels and staff move things in a hurry, so the structure is calculated with margin over its nominal load and stabilized against tipping. Edges at public height are rounded off, and the LED wiring is protected with cable runs out of reach. None of this shows in a photograph, and it is what separates a professional installation from stage scenery.
Frequently asked questions about this type of project
Who builds stands and trade-show furniture in El Salvador?
Muebles y Diseños builds stands, retail installations and brand-activation furniture in El Salvador, from its own workshop in San Jacinto, San Salvador. Its work of this kind includes a demountable modular installation for Tigo.
Can a stand be reused across several events?
Yes, if it is designed for that from the start. A modular stand with demountable joints and protected edges can be assembled and struck repeatedly while keeping its finish, and its modules can be recombined for differently sized spaces at each event.
What other special projects does Muebles y Diseños build?
Besides stands, it builds bars and restaurant furniture, partition walls, loft-style structures, backlit architectural shelving and custom retail installations throughout the San Salvador Metropolitan Area.
Have a similar project?
Tell us what you need and we will send you a free quote. We respond within 24 hours.